Decks and Fences
Decks and Fences in Matthews, NC
Decks and fences in Matthews, NC must be built to withstand humidity, seasonal rain, and temperature fluctuations while maintaining structural stability. Outdoor structures require proper footing depth, material selection, and fastening systems to ensure long-term durability and code compliance.
EdgeCraft Remodel and Upgrade
provides deck construction and fence installation services tailored to residential properties throughout Matthews. Each project begins with a site evaluation to assess soil conditions, drainage patterns, and property layout before construction begins.
Custom Deck Construction
Deck construction involves careful planning, structural framing, and secure anchoring to the home and ground. Improper installation can lead to shifting, sagging, or premature deterioration.
Footings are dug to appropriate depths based on local building standards in Matthews, NC. Concrete piers are poured to support vertical posts and prevent movement over time. Framing components are assembled using pressure-treated lumber or other approved structural materials.
Deck boards are installed with consistent spacing to allow water drainage and airflow. Fasteners are corrosion-resistant to prevent rust in humid conditions. Ledger boards are securely anchored to the home’s framing to provide stable attachment.
Proper flashing is installed between the deck and home exterior to prevent water intrusion.
Wood and Composite Decking Materials
Deck material selection influences maintenance requirements and long-term performance.
Pressure-Treated Wood Decks
Pressure-treated lumber is commonly used due to its resistance to insects and moisture. Boards are sealed or stained after installation to enhance durability. Regular maintenance may be required to preserve appearance and prevent weathering.
Spacing between boards is calculated to allow for expansion and contraction during seasonal temperature changes in Matthews.
Composite Decking Installation
Composite decking materials provide resistance to moisture and fading. Installation follows manufacturer guidelines regarding spacing, hidden fasteners, and support framing.
Because composite boards expand and contract differently than wood, proper installation techniques are critical. Ventilation beneath the deck is maintained to prevent trapped moisture.
Composite decking is often selected during remodeling projects where homeowners want a long-lasting surface with reduced maintenance requirements.
Fiber Cement and Engineered Wood Siding
Fiber cement and engineered wood siding provide additional durability and a different aesthetic compared to vinyl. These materials require precise cutting, sealing, and fastening techniques.
Fiber Cement Installation
Fiber cement boards are secured using corrosion-resistant fasteners. Proper spacing is maintained between boards and at butt joints to accommodate expansion. All cut edges are sealed to prevent moisture intrusion.
Due to the weight of fiber cement, additional support may be required depending on the home’s structure. Installation follows manufacturer guidelines to ensure long-term performance.
Engineered Wood Siding
Engineered wood siding combines wood fibers with protective coatings. Installation includes moisture barrier placement and secure fastening into structural framing. Proper clearance from the ground and roofing surfaces helps prevent water damage.
These materials are commonly selected during remodeling projects where homeowners seek a specific exterior appearance.
Fence Installation and Replacement
Fence installation requires accurate property line identification, post stabilization, and secure panel attachment. Each fence is built to provide structural support and alignment across varying terrain.
Fence posts are set in concrete to prevent shifting. Post depth and spacing are determined based on fence height and material type. Alignment is carefully measured to maintain straight runs and uniform spacing.
Existing fences are removed carefully during replacement projects. Ground conditions are evaluated before installing new posts to ensure stability.
Wood, Vinyl, and Privacy Fencing
Fence materials are selected based on durability, maintenance preferences, and intended function.
Wood Fencing
Wood fences offer versatility in design and can be installed as privacy panels, picket styles, or horizontal slat systems. Boards are secured with weather-resistant fasteners and sealed or stained to protect against moisture.
Proper spacing between boards allows for expansion while maintaining structural strength.
Vinyl and Privacy Fencing
Vinyl fencing provides low-maintenance durability and resistance to weather exposure. Panels are installed with reinforced posts and secure brackets. Expansion allowances are included to accommodate temperature changes.
Privacy fencing requires consistent panel alignment to prevent gaps. Gates are reinforced with heavy-duty hinges and latching systems to maintain functionality over time.
Gates, Railings, and Structural Enhancements
Deck and fence projects often include custom gates, railings, or structural additions that enhance safety and accessibility.
Deck Railings and Stairs
Railings are installed to meet height and spacing requirements. Balusters are aligned evenly to maintain safety standards. Stair stringers are cut accurately to ensure uniform rise and run dimensions.
Handrails are secured to framing components for stability.
Fence Gates and Hardware
Gates are constructed with reinforced framing to prevent sagging. Hinges and latches are selected based on fence material and intended use. Gate posts are set deeper than standard fence posts to support additional weight and movement.
Each component is installed with long-term structural performance in mind.
Deck and Fence Construction Process in Matthews, NC
Decks and fences in Matthews, NC require adherence to local building codes and consideration of property grading. EdgeCraft Remodel and Upgrade begins each project with site measurements and structural planning.
Permits are obtained when required, and underground utilities are identified before digging footings. Framing and post installation are completed before decking boards or fence panels are secured.
Final inspections confirm structural stability, alignment, and secure fastening. Surfaces are checked for levelness, spacing consistency, and proper anchoring.
For homeowners seeking professional decks and fences in Matthews, NC, EdgeCraft Remodel and Upgrade
provides custom construction and replacement services designed to withstand local climate conditions while maintaining structural integrity and functional performance.
